Chinese 106 wpc flat plate wpc wall panel cheapest producers
Chinese 106 wpc flat plate wpc wall panel cheapest producers，Chinese 106 wpc flat plate wpc wall panel cheapest producers，Chinese 106 wpc flat plate wpc wall panel cheapest producers3D Wooden Wood Plastic ， 106 flat plate， 195 Great Wall board ，202 Great Wall board ， 168 Great Wall board ，168Fluted Wall Panels， 195*12 3D Wooden Wood Plastic， Wood plastic wall panels ，150 wood-plastic wallboard ，160 wood-plastic grille panel，WPC Wall Panel For Indoor，WPC fluted Wall Panel ，WPC Wall Cladding，Fluted Wall Panels
Utility knife, desktop cutting machine (choose high speed serrated saw blade), grinder (serrated saw blade), square, tape measure, triangle file, curve saw, 3P air pump, air gun, cement nail gun, etc. Four, integrated wall installation processing details. 1. The bending at right angles, during the bending process, the bending line must be calculated into the thickness of the wall (for example: the column bending at right angles, the first piece of material is 5cm away from the right Angle, the bending line is in the prominent part, the bending line should be at 5.8cm, and so on.
In the bending process, note that the bending line is drawn first, and then the polyurethane material is taken, which is generally about 8mm. Keep the bend as straight as possible. 2. Concave-convex plate 45-degree splicing: After the plate is cut at 45 degrees, the burr is flattened and then spliced. Make sure that the joints are neat. 3. Right-angle splicing of concave-convex plate: polish the inside of the splicing plate at a 45 degree Angle for insertion and assembly, and directly insert the splicing plate into the notch of another plate.